neptunium-firmware/USB_COMPOSITE/Class/MSC/Inc/usbd_msc_scsi.h

186 lines
5.5 KiB
C
Raw Normal View History

2024-07-06 05:33:28 +08:00
/**
******************************************************************************
* @file usbd_msc_scsi.h
* @author MCD Application Team
* @brief Header for the usbd_msc_scsi.c file
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2015 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under Ultimate Liberty license
* SLA0044, the "License"; You may not use this file except in compliance with
* the License. You may obtain a copy of the License at:
* www.st.com/SLA0044
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USBD_MSC_SCSI_H
#define __USBD_MSC_SCSI_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "usbd_def.h"
/** @addtogroup STM32_USB_DEVICE_LIBRARY
* @{
*/
/** @defgroup USBD_SCSI
* @brief header file for the storage disk file
* @{
*/
/** @defgroup USBD_SCSI_Exported_Defines
* @{
*/
#define SENSE_LIST_DEEPTH 4U
/* SCSI Commands */
#define SCSI_FORMAT_UNIT 0x04U
#define SCSI_INQUIRY 0x12U
#define SCSI_MODE_SELECT6 0x15U
#define SCSI_MODE_SELECT10 0x55U
#define SCSI_MODE_SENSE6 0x1AU
#define SCSI_MODE_SENSE10 0x5AU
#define SCSI_ALLOW_MEDIUM_REMOVAL 0x1EU
#define SCSI_READ6 0x08U
#define SCSI_READ10 0x28U
#define SCSI_READ12 0xA8U
#define SCSI_READ16 0x88U
#define SCSI_READ_CAPACITY10 0x25U
#define SCSI_READ_CAPACITY16 0x9EU
#define SCSI_REQUEST_SENSE 0x03U
#define SCSI_START_STOP_UNIT 0x1BU
#define SCSI_TEST_UNIT_READY 0x00U
#define SCSI_WRITE6 0x0AU
#define SCSI_WRITE10 0x2AU
#define SCSI_WRITE12 0xAAU
#define SCSI_WRITE16 0x8AU
#define SCSI_VERIFY10 0x2FU
#define SCSI_VERIFY12 0xAFU
#define SCSI_VERIFY16 0x8FU
#define SCSI_SEND_DIAGNOSTIC 0x1DU
#define SCSI_READ_FORMAT_CAPACITIES 0x23U
#define NO_SENSE 0U
#define RECOVERED_ERROR 1U
#define NOT_READY 2U
#define MEDIUM_ERROR 3U
#define HARDWARE_ERROR 4U
#define ILLEGAL_REQUEST 5U
#define UNIT_ATTENTION 6U
#define DATA_PROTECT 7U
#define BLANK_CHECK 8U
#define VENDOR_SPECIFIC 9U
#define COPY_ABORTED 10U
#define ABORTED_COMMAND 11U
#define VOLUME_OVERFLOW 13U
#define MISCOMPARE 14U
#define INVALID_CDB 0x20U
#define INVALID_FIELED_IN_COMMAND 0x24U
#define PARAMETER_LIST_LENGTH_ERROR 0x1AU
#define INVALID_FIELD_IN_PARAMETER_LIST 0x26U
#define ADDRESS_OUT_OF_RANGE 0x21U
#define MEDIUM_NOT_PRESENT 0x3AU
#define MEDIUM_HAVE_CHANGED 0x28U
#define WRITE_PROTECTED 0x27U
#define UNRECOVERED_READ_ERROR 0x11U
#define WRITE_FAULT 0x03U
#define READ_FORMAT_CAPACITY_DATA_LEN 0x0CU
#define READ_CAPACITY10_DATA_LEN 0x08U
#define REQUEST_SENSE_DATA_LEN 0x12U
#define STANDARD_INQUIRY_DATA_LEN 0x24U
#define BLKVFY 0x04U
#define SCSI_MEDIUM_UNLOCKED 0x00U
#define SCSI_MEDIUM_LOCKED 0x01U
#define SCSI_MEDIUM_EJECTED 0x02U
/**
* @}
*/
/** @defgroup USBD_SCSI_Exported_TypesDefinitions
* @{
*/
typedef struct _SENSE_ITEM
{
uint8_t Skey;
union
{
struct _ASCs
{
uint8_t ASC;
uint8_t ASCQ;
} b;
uint8_t ASC;
uint8_t *pData;
} w;
} USBD_SCSI_SenseTypeDef;
/**
* @}
*/
/** @defgroup USBD_SCSI_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBD_SCSI_Exported_Variables
* @{
*/
/**
* @}
*/
/** @defgroup USBD_SCSI_Exported_FunctionsPrototype
* @{
*/
int8_t SCSI_ProcessCmd(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *cmd);
void SCSI_SenseCode(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t sKey,
uint8_t ASC);
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __USBD_MSC_SCSI_H */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/