mirror of
https://github.com/peter-tanner/neptunium-firmware.git
synced 2024-12-02 21:10:18 +08:00
60 lines
2.2 KiB
Markdown
60 lines
2.2 KiB
Markdown
|
# Changelog
|
||
|
|
|
||
|
|
All notable changes to this project will be documented in this file.
|
||
|
|
|
||
|
|
The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
|
||
|
|
|
||
|
|
## [2.3.2] - 2023-12-15
|
||
|
|
|
||
|
|
### Changed
|
||
|
|
- `sx126x_set_gfsk_sync_word()` function - Remove memcpy usage
|
||
|
|
|
||
|
|
## [2.3.1] - 2023-11-8
|
||
|
|
|
||
|
|
### Fixed
|
||
|
|
- `lr_fhss_payload_whitening()` function - Cast missing on lfsr parameter
|
||
|
|
|
||
|
|
## [2.3.0] - 2023-10-10
|
||
|
|
|
||
|
|
### Added
|
||
|
|
- `sx126x_set_bpsk_mod_params()` function - Set the modulation parameters for BPSK packets
|
||
|
|
- `sx126x_set_bpsk_pkt_params()` function - Set the packet parameters for BPSK packets
|
||
|
|
|
||
|
|
## [2.2.0] - 2023-03-27
|
||
|
|
|
||
|
|
### Added
|
||
|
|
|
||
|
|
- `sx126x_driver_version_get_version_string()` function - produces a c-string representation of the driver version
|
||
|
|
- `SX126X_DRIVER_VERSION_CHECK` macro - validates the provided version information is compatible with the driver
|
||
|
|
- `sx126x_lr_fhss_get_bit_delay_in_us( )` function - computes the delay between the last LR-FHSS bit sent and the TX done interrupt
|
||
|
|
|
||
|
|
## [2.1.0] - 2022-05-18
|
||
|
|
|
||
|
|
### Added
|
||
|
|
|
||
|
|
- `sx126x_set_gfsk_pkt_address()` function - configure both GFSK node and brodcast filtering addresses
|
||
|
|
- `sx126x_handle_rx_done()` function - perform all requested actions when the chip leaves the Rx mode
|
||
|
|
|
||
|
|
## [2.0.1] - 2021-11-23
|
||
|
|
|
||
|
|
### Added
|
||
|
|
|
||
|
|
- Support of LR-FHSS (see `sx126x_lr_fhss.c` and `sx126x_lr_fhss.h`)
|
||
|
|
- `sx126x_get_lora_params_from_header()` function - extracts the LoRa coding rate and CRC configuration from the packet header
|
||
|
|
- `sx126x_add_registers_to_retention_list()` function - allows to add up to 4 registers to the retention list
|
||
|
|
- `sx126x_init_retention_list()` - add registers used by workarounds in the driver to the retention list
|
||
|
|
- `sx126x_cal_img_in_mhz()` - takes frequency interval bounds in MHz for calibration
|
||
|
|
|
||
|
|
### Changed
|
||
|
|
|
||
|
|
- Revised BSD License changed to the Clear BSD License
|
||
|
|
- `sx126x_set_lora_symb_nb_timeout` now rounds up to nearest possible number of symbol
|
||
|
|
- `SX126X_REG_IRQ_POLARITY` is renamed `SX126X_REG_IQ_POLARITY`
|
||
|
|
- `sx126x_cal_img()` function - takes frequency interval bounds in raw steps
|
||
|
|
|
||
|
|
## [1.0.0] - 2020-09-24
|
||
|
|
|
||
|
|
### General
|
||
|
|
|
||
|
|
- Initial version
|