/** ****************************************************************************** * @file stm32f3xx_hal_i2c_ex.c * @author MCD Application Team * @brief I2C Extended HAL module driver. * This file provides firmware functions to manage the following * functionalities of I2C Extended peripheral: * + Filter Mode Functions * + WakeUp Mode Functions * + FastModePlus Functions * ****************************************************************************** * @attention * * Copyright (c) 2016 STMicroelectronics. * All rights reserved. * * This software is licensed under terms that can be found in the LICENSE file * in the root directory of this software component. * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** @verbatim ============================================================================== ##### I2C peripheral Extended features ##### ============================================================================== [..] Comparing to other previous devices, the I2C interface for STM32F3xx devices contains the following additional features (+) Possibility to disable or enable Analog Noise Filter (+) Use of a configured Digital Noise Filter (+) Disable or enable wakeup from Stop mode(s) (+) Disable or enable Fast Mode Plus ##### How to use this driver ##### ============================================================================== [..] This driver provides functions to configure Noise Filter and Wake Up Feature (#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter() (#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter() (#) Configure the enable or disable of I2C Wake Up Mode using the functions : (++) HAL_I2CEx_EnableWakeUp() (++) HAL_I2CEx_DisableWakeUp() (#) Configure the enable or disable of fast mode plus driving capability using the functions : (++) HAL_I2CEx_EnableFastModePlus() (++) HAL_I2CEx_DisableFastModePlus() @endverbatim */ /* Includes ------------------------------------------------------------------*/ #include "stm32f3xx_hal.h" /** @addtogroup STM32F3xx_HAL_Driver * @{ */ /** @defgroup I2CEx I2CEx * @brief I2C Extended HAL module driver * @{ */ #ifdef HAL_I2C_MODULE_ENABLED /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ /* Private macro -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private function prototypes -----------------------------------------------*/ /* Private functions ---------------------------------------------------------*/ /** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions * @{ */ /** @defgroup I2CEx_Exported_Functions_Group1 Filter Mode Functions * @brief Filter Mode Functions * @verbatim =============================================================================== ##### Filter Mode Functions ##### =============================================================================== [..] This section provides functions allowing to: (+) Configure Noise Filters @endverbatim * @{ */ /** * @brief Configure I2C Analog noise filter. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains * the configuration information for the specified I2Cx peripheral. * @param AnalogFilter New state of the Analog filter. * @retval HAL status */ HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter) { /* Check the parameters */ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter)); if (hi2c->State == HAL_I2C_STATE_READY) { /* Process Locked */ __HAL_LOCK(hi2c); hi2c->State = HAL_I2C_STATE_BUSY; /* Disable the selected I2C peripheral */ __HAL_I2C_DISABLE(hi2c); /* Reset I2Cx ANOFF bit */ hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF); /* Set analog filter bit*/ hi2c->Instance->CR1 |= AnalogFilter; __HAL_I2C_ENABLE(hi2c); hi2c->State = HAL_I2C_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hi2c); return HAL_OK; } else { return HAL_BUSY; } } /** * @brief Configure I2C Digital noise filter. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains * the configuration information for the specified I2Cx peripheral. * @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F. * @retval HAL status */ HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter) { uint32_t tmpreg; /* Check the parameters */ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter)); if (hi2c->State == HAL_I2C_STATE_READY) { /* Process Locked */ __HAL_LOCK(hi2c); hi2c->State = HAL_I2C_STATE_BUSY; /* Disable the selected I2C peripheral */ __HAL_I2C_DISABLE(hi2c); /* Get the old register value */ tmpreg = hi2c->Instance->CR1; /* Reset I2Cx DNF bits [11:8] */ tmpreg &= ~(I2C_CR1_DNF); /* Set I2Cx DNF coefficient */ tmpreg |= DigitalFilter << 8U; /* Store the new register value */ hi2c->Instance->CR1 = tmpreg; __HAL_I2C_ENABLE(hi2c); hi2c->State = HAL_I2C_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hi2c); return HAL_OK; } else { return HAL_BUSY; } } /** * @} */ /** @defgroup I2CEx_Exported_Functions_Group2 WakeUp Mode Functions * @brief WakeUp Mode Functions * @verbatim =============================================================================== ##### WakeUp Mode Functions ##### =============================================================================== [..] This section provides functions allowing to: (+) Configure Wake Up Feature @endverbatim * @{ */ /** * @brief Enable I2C wakeup from Stop mode(s). * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains * the configuration information for the specified I2Cx peripheral. * @retval HAL status */ HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c) { /* Check the parameters */ assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); if (hi2c->State == HAL_I2C_STATE_READY) { /* Process Locked */ __HAL_LOCK(hi2c); hi2c->State = HAL_I2C_STATE_BUSY; /* Disable the selected I2C peripheral */ __HAL_I2C_DISABLE(hi2c); /* Enable wakeup from stop mode */ hi2c->Instance->CR1 |= I2C_CR1_WUPEN; __HAL_I2C_ENABLE(hi2c); hi2c->State = HAL_I2C_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hi2c); return HAL_OK; } else { return HAL_BUSY; } } /** * @brief Disable I2C wakeup from Stop mode(s). * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains * the configuration information for the specified I2Cx peripheral. * @retval HAL status */ HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c) { /* Check the parameters */ assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); if (hi2c->State == HAL_I2C_STATE_READY) { /* Process Locked */ __HAL_LOCK(hi2c); hi2c->State = HAL_I2C_STATE_BUSY; /* Disable the selected I2C peripheral */ __HAL_I2C_DISABLE(hi2c); /* Enable wakeup from stop mode */ hi2c->Instance->CR1 &= ~(I2C_CR1_WUPEN); __HAL_I2C_ENABLE(hi2c); hi2c->State = HAL_I2C_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hi2c); return HAL_OK; } else { return HAL_BUSY; } } /** * @} */ /** @defgroup I2CEx_Exported_Functions_Group3 Fast Mode Plus Functions * @brief Fast Mode Plus Functions * @verbatim =============================================================================== ##### Fast Mode Plus Functions ##### =============================================================================== [..] This section provides functions allowing to: (+) Configure Fast Mode Plus @endverbatim * @{ */ /** * @brief Enable the I2C fast mode plus driving capability. * @param ConfigFastModePlus Selects the pin. * This parameter can be one of the @ref I2CEx_FastModePlus values * @note For I2C1, fast mode plus driving capability can be enabled on all selected * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently * on each one of the following pins PB6, PB7, PB8 and PB9. * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability * can be enabled only by using I2C_FASTMODEPLUS_I2C1 parameter. * @note For all I2C2 pins fast mode plus driving capability can be enabled * only by using I2C_FASTMODEPLUS_I2C2 parameter. * @note For all I2C3 pins fast mode plus driving capability can be enabled * only by using I2C_FASTMODEPLUS_I2C3 parameter. * @retval None */ void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus) { /* Check the parameter */ assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); /* Enable SYSCFG clock */ __HAL_RCC_SYSCFG_CLK_ENABLE(); /* Enable fast mode plus driving capability for selected pin */ SET_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus); } /** * @brief Disable the I2C fast mode plus driving capability. * @param ConfigFastModePlus Selects the pin. * This parameter can be one of the @ref I2CEx_FastModePlus values * @note For I2C1, fast mode plus driving capability can be disabled on all selected * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently * on each one of the following pins PB6, PB7, PB8 and PB9. * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability * can be disabled only by using I2C_FASTMODEPLUS_I2C1 parameter. * @note For all I2C2 pins fast mode plus driving capability can be disabled * only by using I2C_FASTMODEPLUS_I2C2 parameter. * @note For all I2C3 pins fast mode plus driving capability can be disabled * only by using I2C_FASTMODEPLUS_I2C3 parameter. * @retval None */ void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus) { /* Check the parameter */ assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); /* Enable SYSCFG clock */ __HAL_RCC_SYSCFG_CLK_ENABLE(); /* Disable fast mode plus driving capability for selected pin */ CLEAR_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus); } /** * @} */ /** * @} */ #endif /* HAL_I2C_MODULE_ENABLED */ /** * @} */ /** * @} */