mirror of
https://github.com/peter-tanner/neptunium-firmware.git
synced 2024-11-30 20:10:19 +08:00
270 lines
8.5 KiB
C
270 lines
8.5 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f3xx_hal_pwr_ex.c
|
|
* @author MCD Application Team
|
|
* @brief Extended PWR HAL module driver.
|
|
* This file provides firmware functions to manage the following
|
|
* functionalities of the Power Controller (PWR) peripheral:
|
|
* + Extended Initialization and de-initialization functions
|
|
* + Extended Peripheral Control functions
|
|
*
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2016 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f3xx_hal.h"
|
|
|
|
/** @addtogroup STM32F3xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup PWREx PWREx
|
|
* @brief PWREx HAL module driver
|
|
* @{
|
|
*/
|
|
|
|
#ifdef HAL_PWR_MODULE_ENABLED
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/** @defgroup PWREx_Private_Constants PWR Extended Private Constants
|
|
* @{
|
|
*/
|
|
#define PVD_MODE_IT (0x00010000U)
|
|
#define PVD_MODE_EVT (0x00020000U)
|
|
#define PVD_RISING_EDGE (0x00000001U)
|
|
#define PVD_FALLING_EDGE (0x00000002U)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
/* Exported functions ---------------------------------------------------------*/
|
|
|
|
/** @defgroup PWREx_Exported_Functions PWR Extended Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup PWREx_Exported_Functions_Group1 Peripheral Extended Control Functions
|
|
* @brief Extended Peripheral Control functions
|
|
*
|
|
@verbatim
|
|
|
|
===============================================================================
|
|
##### Peripheral Extended control functions #####
|
|
===============================================================================
|
|
*** PVD configuration (present on all other devices than STM32F3x8 devices) ***
|
|
=========================
|
|
[..]
|
|
(+) The PVD is used to monitor the VDD power supply by comparing it to a
|
|
threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR).
|
|
(+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower
|
|
than the PVD threshold. This event is internally connected to the EXTI
|
|
line16 and can generate an interrupt if enabled. This is done through
|
|
__HAL_PWR_PVD_EXTI_ENABLE_IT() macro
|
|
(+) The PVD is stopped in Standby mode.
|
|
-@- PVD is not available on STM32F3x8 Product Line
|
|
|
|
|
|
*** Voltage regulator ***
|
|
=========================
|
|
[..]
|
|
(+) The voltage regulator is always enabled after Reset. It works in three different
|
|
modes.
|
|
In Run mode, the regulator supplies full power to the 1.8V domain (core, memories
|
|
and digital peripherals).
|
|
In Stop mode, the regulator supplies low power to the 1.8V domain, preserving
|
|
contents of registers and SRAM.
|
|
In Stop mode, the regulator is powered off. The contents of the registers and SRAM
|
|
are lost except for the Standby circuitry and the Backup Domain.
|
|
Note: in the STM32F3x8xx devices, the voltage regulator is bypassed and the
|
|
microcontroller must be powered from a nominal VDD = 1.8V +/-8U% voltage.
|
|
|
|
|
|
(+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower
|
|
than the PVD threshold. This event is internally connected to the EXTI
|
|
line16 and can generate an interrupt if enabled. This is done through
|
|
__HAL_PWR_PVD_EXTI_ENABLE_IT() macro
|
|
(+) The PVD is stopped in Standby mode.
|
|
|
|
|
|
*** SDADC power configuration ***
|
|
================================
|
|
[..]
|
|
(+) On STM32F373xC/STM32F378xx devices, there are up to
|
|
3 SDADC instances that can be enabled/disabled.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
#if defined(STM32F302xE) || defined(STM32F303xE) || \
|
|
defined(STM32F302xC) || defined(STM32F303xC) || \
|
|
defined(STM32F303x8) || defined(STM32F334x8) || \
|
|
defined(STM32F301x8) || defined(STM32F302x8) || \
|
|
defined(STM32F373xC)
|
|
|
|
/**
|
|
* @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD).
|
|
* @param sConfigPVD pointer to an PWR_PVDTypeDef structure that contains the configuration
|
|
* information for the PVD.
|
|
* @note Refer to the electrical characteristics of your device datasheet for
|
|
* more details about the voltage threshold corresponding to each
|
|
* detection level.
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel));
|
|
assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode));
|
|
|
|
/* Set PLS[7:5] bits according to PVDLevel value */
|
|
MODIFY_REG(PWR->CR, PWR_CR_PLS, sConfigPVD->PVDLevel);
|
|
|
|
/* Clear any previous config. Keep it clear if no event or IT mode is selected */
|
|
__HAL_PWR_PVD_EXTI_DISABLE_EVENT();
|
|
__HAL_PWR_PVD_EXTI_DISABLE_IT();
|
|
__HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
|
|
|
|
/* Configure interrupt mode */
|
|
if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT)
|
|
{
|
|
__HAL_PWR_PVD_EXTI_ENABLE_IT();
|
|
}
|
|
|
|
/* Configure event mode */
|
|
if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT)
|
|
{
|
|
__HAL_PWR_PVD_EXTI_ENABLE_EVENT();
|
|
}
|
|
|
|
/* Configure the edge */
|
|
if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE)
|
|
{
|
|
__HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();
|
|
}
|
|
|
|
if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE)
|
|
{
|
|
__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Enables the Power Voltage Detector(PVD).
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_EnablePVD(void)
|
|
{
|
|
SET_BIT(PWR->CR, PWR_CR_PVDE);
|
|
}
|
|
|
|
/**
|
|
* @brief Disables the Power Voltage Detector(PVD).
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_DisablePVD(void)
|
|
{
|
|
CLEAR_BIT(PWR->CR, PWR_CR_PVDE);
|
|
}
|
|
|
|
/**
|
|
* @brief This function handles the PWR PVD interrupt request.
|
|
* @note This API should be called under the PVD_IRQHandler().
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_PVD_IRQHandler(void)
|
|
{
|
|
/* Check PWR exti flag */
|
|
if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET)
|
|
{
|
|
/* PWR PVD interrupt user callback */
|
|
HAL_PWR_PVDCallback();
|
|
|
|
/* Clear PWR Exti pending bit */
|
|
__HAL_PWR_PVD_EXTI_CLEAR_FLAG();
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief PWR PVD interrupt callback
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_PWR_PVDCallback(void)
|
|
{
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_PWR_PVDCallback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
#endif /* STM32F302xE || STM32F303xE || */
|
|
/* STM32F302xC || STM32F303xC || */
|
|
/* STM32F303x8 || STM32F334x8 || */
|
|
/* STM32F301x8 || STM32F302x8 || */
|
|
/* STM32F373xC */
|
|
|
|
#if defined(STM32F373xC) || defined(STM32F378xx)
|
|
|
|
/**
|
|
* @brief Enables the SDADC peripheral functionaliy
|
|
* @param Analogx specifies the SDADC peripheral instance.
|
|
* This parameter can be: PWR_SDADC_ANALOG1, PWR_SDADC_ANALOG2 or PWR_SDADC_ANALOG3.
|
|
* @retval None
|
|
*/
|
|
void HAL_PWREx_EnableSDADC(uint32_t Analogx)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_PWR_SDADC_ANALOG(Analogx));
|
|
|
|
/* Enable PWR clock interface for SDADC use */
|
|
__HAL_RCC_PWR_CLK_ENABLE();
|
|
|
|
PWR->CR |= Analogx;
|
|
}
|
|
|
|
/**
|
|
* @brief Disables the SDADC peripheral functionaliy
|
|
* @param Analogx specifies the SDADC peripheral instance.
|
|
* This parameter can be: PWR_SDADC_ANALOG1, PWR_SDADC_ANALOG2 or PWR_SDADC_ANALOG3.
|
|
* @retval None
|
|
*/
|
|
void HAL_PWREx_DisableSDADC(uint32_t Analogx)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_PWR_SDADC_ANALOG(Analogx));
|
|
|
|
PWR->CR &= ~Analogx;
|
|
}
|
|
|
|
#endif /* STM32F373xC || STM32F378xx */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#endif /* HAL_PWR_MODULE_ENABLED */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|