mirror of
https://github.com/peter-tanner/peter-tanner.github.io.git
synced 2024-11-30 20:10:18 +08:00
35 lines
1.6 KiB
Markdown
35 lines
1.6 KiB
Markdown
---
|
|
title: PCB manufacturing checklist
|
|
author: peter
|
|
date: 2024-02-18 00:06:32 +0800
|
|
categories: [Electronics] # Blogging | Electronics | Programming | Mechanical
|
|
tags: [electronics] # systems | embedded | rf | microwave | electronics | solidworks | automation
|
|
---
|
|
|
|
A list of things to check before putting a board into production. Update this list as fails occurs.
|
|
|
|
## Pre-ordering
|
|
|
|
- [ ] Put `JLCJLCJLCJLC` text on the PCB to ensure the order number is placed in a hidden location under a connector, large component, etc.
|
|
|
|
## PCB ordering
|
|
|
|
### Ordering
|
|
|
|
- [ ] Select "Specify a location" for remove order number to ensure the the `JLCJLCJLCJLC` text is replaced with the order number.\
|
|
|
|
- [ ] Make sure expensive items/option parts not meant for assembly are not placed down/autodetected by JLCPCB's parts catalog (you should use the variants system to ensure this cannot happen).
|
|
- [ ] Check the orientation of each IC and diode in the PCBA list. For each item, make a note that it has been checked/corrected.
|
|
- [ ] Check if impedance control is needed. Select `JLC04161H-7628` for standard impedance control stackup.\
|
|
|
|
|
|
### Checkout
|
|
|
|
- [ ] Make sure to use the coupon for free PCBA setup.
|
|
|
|
## Ordering separate parts from Mouser/Digikey
|
|
|
|
Take a risk-adverse approach since ordering individual parts is expensive with shipping fees.
|
|
|
|
- [ ] Create variant for parts used in JLC and parts which need to be ordered separately. **Double check the BOM and order extras** of critical components.
|