mirror of
https://github.com/peter-tanner/peter-tanner.github.io.git
synced 2024-11-30 20:10:18 +08:00
28 lines
2.1 KiB
Markdown
28 lines
2.1 KiB
Markdown
---
|
|
title: HP 8560A spectrum analyzer as a frequency generator
|
|
author: Peter Tanner
|
|
date: 2023-08-06 21:45:13 +0800
|
|
categories: [Electronics] # Blogging | Electronics | Programming | Mechanical
|
|
tags: [electronics, rf, oscilloscope, spectrum analyzer, hack] # systems | embedded | rf | microwave | electronics | solidworks | automation
|
|
---
|
|
|
|
I just bought a Hitachi VC-6025 oscilloscope from my Singapore trip for 85 SGD. It's a good deal, since there is not a lot of second-hand electronics auctions on Ebay Australia, and the shipping costs from overseas or even interstate make it not very economical.
|
|
|
|
I was inspired by [this blog post](http://www.toughdev.com/content/2021/05/vintage-oscilloscopes-to-the-test-hitachi-vc-6025-gw-instek-gos-6103-and-kenwood-cs-5275/) and decided to test the frequency response of the oscilloscope. I didn't have any sort of frequency generator though, so I used a HP 8560A spectrum analyzer to generate the frequency.
|
|
|
|
|
|
|
|
Not shown in the picture, there is a N type to SMA, SMA to BNC cable which connects to the scope (yes, this is very suboptimal but I don't have many cables laying around - I still need to buy probes). The cable is connected to the tracking generator output of the SA.
|
|
|
|
As you can see on the screen, I'm operating the SA in zero-span mode. This also makes the tracking generator output to have a span of 0 Hz - effectively, it generates a pure signal.
|
|
|
|
By changing the center frequency I can select the output frequency of the TG. As shown in the image, the oscilloscope is triggering on the 25 MHz signal nicely.
|
|
|
|
|
|
|
|
At 200 MHz, the signal is heavily attenuated (as expected - the bandwidth of the Hitachi VC-6025 is 50 MHz in analog mode) and it is heavily unfocused, however it still triggers. Above 200 MHz it is so unfocused, it becomes unrecognizable.
|
|
|
|
Bonus image: why CRTs are just great to look at
|
|
|
|
|