/** ****************************************************************************** * @file stm32f3xx_hal_pcd.h * @author MCD Application Team * @brief Header file of PCD HAL module. ****************************************************************************** * @attention * * Copyright (c) 2016 STMicroelectronics. * All rights reserved. * * This software is licensed under terms that can be found in the LICENSE file * in the root directory of this software component. * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef STM32F3xx_HAL_PCD_H #define STM32F3xx_HAL_PCD_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f3xx_ll_usb.h" #if defined (USB) /** @addtogroup STM32F3xx_HAL_Driver * @{ */ /** @addtogroup PCD * @{ */ /* Exported types ------------------------------------------------------------*/ /** @defgroup PCD_Exported_Types PCD Exported Types * @{ */ /** * @brief PCD State structure definition */ typedef enum { HAL_PCD_STATE_RESET = 0x00, HAL_PCD_STATE_READY = 0x01, HAL_PCD_STATE_ERROR = 0x02, HAL_PCD_STATE_BUSY = 0x03, HAL_PCD_STATE_TIMEOUT = 0x04 } PCD_StateTypeDef; /* Device LPM suspend state */ typedef enum { LPM_L0 = 0x00, /* on */ LPM_L1 = 0x01, /* LPM L1 sleep */ LPM_L2 = 0x02, /* suspend */ LPM_L3 = 0x03, /* off */ } PCD_LPM_StateTypeDef; typedef enum { PCD_LPM_L0_ACTIVE = 0x00, /* on */ PCD_LPM_L1_ACTIVE = 0x01, /* LPM L1 sleep */ } PCD_LPM_MsgTypeDef; typedef enum { PCD_BCD_ERROR = 0xFF, PCD_BCD_CONTACT_DETECTION = 0xFE, PCD_BCD_STD_DOWNSTREAM_PORT = 0xFD, PCD_BCD_CHARGING_DOWNSTREAM_PORT = 0xFC, PCD_BCD_DEDICATED_CHARGING_PORT = 0xFB, PCD_BCD_DISCOVERY_COMPLETED = 0x00, } PCD_BCD_MsgTypeDef; typedef USB_TypeDef PCD_TypeDef; typedef USB_CfgTypeDef PCD_InitTypeDef; typedef USB_EPTypeDef PCD_EPTypeDef; /** * @brief PCD Handle Structure definition */ #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) typedef struct __PCD_HandleTypeDef #else typedef struct #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ { PCD_TypeDef *Instance; /*!< Register base address */ PCD_InitTypeDef Init; /*!< PCD required parameters */ __IO uint8_t USB_Address; /*!< USB Address */ PCD_EPTypeDef IN_ep[8]; /*!< IN endpoint parameters */ PCD_EPTypeDef OUT_ep[8]; /*!< OUT endpoint parameters */ HAL_LockTypeDef Lock; /*!< PCD peripheral status */ __IO PCD_StateTypeDef State; /*!< PCD communication state */ __IO uint32_t ErrorCode; /*!< PCD Error code */ uint32_t Setup[12]; /*!< Setup packet buffer */ PCD_LPM_StateTypeDef LPM_State; /*!< LPM State */ uint32_t BESL; void *pData; /*!< Pointer to upper stack Handler */ #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) void (* SOFCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD SOF callback */ void (* SetupStageCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Setup Stage callback */ void (* ResetCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Reset callback */ void (* SuspendCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Suspend callback */ void (* ResumeCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Resume callback */ void (* ConnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Connect callback */ void (* DisconnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Disconnect callback */ void (* DataOutStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data OUT Stage callback */ void (* DataInStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data IN Stage callback */ void (* ISOOUTIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO OUT Incomplete callback */ void (* ISOINIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO IN Incomplete callback */ void (* MspInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp Init callback */ void (* MspDeInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp DeInit callback */ #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ } PCD_HandleTypeDef; /** * @} */ /* Include PCD HAL Extended module */ #include "stm32f3xx_hal_pcd_ex.h" /* Exported constants --------------------------------------------------------*/ /** @defgroup PCD_Exported_Constants PCD Exported Constants * @{ */ /** @defgroup PCD_Speed PCD Speed * @{ */ #define PCD_SPEED_FULL USBD_FS_SPEED /** * @} */ /** @defgroup PCD_PHY_Module PCD PHY Module * @{ */ #define PCD_PHY_ULPI 1U #define PCD_PHY_EMBEDDED 2U #define PCD_PHY_UTMI 3U /** * @} */ /** @defgroup PCD_Error_Code_definition PCD Error Code definition * @brief PCD Error Code definition * @{ */ #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) #define HAL_PCD_ERROR_INVALID_CALLBACK (0x00000010U) /*!< Invalid Callback error */ #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ /** * @} */ /** * @} */ /* Exported macros -----------------------------------------------------------*/ /** @defgroup PCD_Exported_Macros PCD Exported Macros * @brief macros to handle interrupts and specific clock configurations * @{ */ #define __HAL_PCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance) #define __HAL_PCD_DISABLE(__HANDLE__) (void)USB_DisableGlobalInt ((__HANDLE__)->Instance) #define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) \ ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__)) #define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR)\ &= (uint16_t)(~(__INTERRUPT__))) #define __HAL_USB_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_WAKEUP_EXTI_LINE #define __HAL_USB_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_WAKEUP_EXTI_LINE) #define __HAL_USB_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_WAKEUP_EXTI_LINE) #define __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = USB_WAKEUP_EXTI_LINE #define __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE() \ do { \ EXTI->FTSR &= ~(USB_WAKEUP_EXTI_LINE); \ EXTI->RTSR |= USB_WAKEUP_EXTI_LINE; \ } while(0U) /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @addtogroup PCD_Exported_Functions PCD Exported Functions * @{ */ /* Initialization/de-initialization functions ********************************/ /** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions * @{ */ HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd); HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd); void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd); void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd); #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) /** @defgroup HAL_PCD_Callback_ID_enumeration_definition HAL USB OTG PCD Callback ID enumeration definition * @brief HAL USB OTG PCD Callback ID enumeration definition * @{ */ typedef enum { HAL_PCD_SOF_CB_ID = 0x01, /*!< USB PCD SOF callback ID */ HAL_PCD_SETUPSTAGE_CB_ID = 0x02, /*!< USB PCD Setup Stage callback ID */ HAL_PCD_RESET_CB_ID = 0x03, /*!< USB PCD Reset callback ID */ HAL_PCD_SUSPEND_CB_ID = 0x04, /*!< USB PCD Suspend callback ID */ HAL_PCD_RESUME_CB_ID = 0x05, /*!< USB PCD Resume callback ID */ HAL_PCD_CONNECT_CB_ID = 0x06, /*!< USB PCD Connect callback ID */ HAL_PCD_DISCONNECT_CB_ID = 0x07, /*!< USB PCD Disconnect callback ID */ HAL_PCD_MSPINIT_CB_ID = 0x08, /*!< USB PCD MspInit callback ID */ HAL_PCD_MSPDEINIT_CB_ID = 0x09 /*!< USB PCD MspDeInit callback ID */ } HAL_PCD_CallbackIDTypeDef; /** * @} */ /** @defgroup HAL_PCD_Callback_pointer_definition HAL USB OTG PCD Callback pointer definition * @brief HAL USB OTG PCD Callback pointer definition * @{ */ typedef void (*pPCD_CallbackTypeDef)(PCD_HandleTypeDef *hpcd); /*!< pointer to a common USB OTG PCD callback function */ typedef void (*pPCD_DataOutStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data OUT Stage callback */ typedef void (*pPCD_DataInStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data IN Stage callback */ typedef void (*pPCD_IsoOutIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO OUT Incomplete callback */ typedef void (*pPCD_IsoInIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO IN Incomplete callback */ /** * @} */ HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID, pPCD_CallbackTypeDef pCallback); HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID); HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, pPCD_DataOutStageCallbackTypeDef pCallback); HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd); HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, pPCD_DataInStageCallbackTypeDef pCallback); HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd); HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, pPCD_IsoOutIncpltCallbackTypeDef pCallback); HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd); HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, pPCD_IsoInIncpltCallbackTypeDef pCallback); HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ /** * @} */ /* I/O operation functions ***************************************************/ /* Non-Blocking mode: Interrupt */ /** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions * @{ */ HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd); HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd); void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd); void HAL_PCD_WKUP_IRQHandler(PCD_HandleTypeDef *hpcd); void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd); void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd); void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd); void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd); void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd); void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd); void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd); void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); /** * @} */ /* Peripheral Control functions **********************************************/ /** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions * @{ */ HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd); HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd); HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address); HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type); HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len); HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len); HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); HAL_StatusTypeDef HAL_PCD_EP_Abort(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); /** * @} */ /* Peripheral State functions ************************************************/ /** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions * @{ */ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); /** * @} */ /** * @} */ /* Private constants ---------------------------------------------------------*/ /** @defgroup PCD_Private_Constants PCD Private Constants * @{ */ /** @defgroup USB_EXTI_Line_Interrupt USB EXTI line interrupt * @{ */ #define USB_WAKEUP_EXTI_LINE (0x1U << 18) /*!< USB FS EXTI Line WakeUp Interrupt */ /** * @} */ /** @defgroup PCD_EP0_MPS PCD EP0 MPS * @{ */ #define PCD_EP0MPS_64 EP_MPS_64 #define PCD_EP0MPS_32 EP_MPS_32 #define PCD_EP0MPS_16 EP_MPS_16 #define PCD_EP0MPS_08 EP_MPS_8 /** * @} */ /** @defgroup PCD_ENDP PCD ENDP * @{ */ #define PCD_ENDP0 0U #define PCD_ENDP1 1U #define PCD_ENDP2 2U #define PCD_ENDP3 3U #define PCD_ENDP4 4U #define PCD_ENDP5 5U #define PCD_ENDP6 6U #define PCD_ENDP7 7U /** * @} */ /** @defgroup PCD_ENDP_Kind PCD Endpoint Kind * @{ */ #define PCD_SNG_BUF 0U #define PCD_DBL_BUF 1U /** * @} */ /** * @} */ /* Private macros ------------------------------------------------------------*/ /** @defgroup PCD_Private_Macros PCD Private Macros * @{ */ /******************** Bit definition for USB_COUNTn_RX register *************/ #define USB_CNTRX_NBLK_MSK (0x1FU << 10) #define USB_CNTRX_BLSIZE (0x1U << 15) /* SetENDPOINT */ #define PCD_SET_ENDPOINT(USBx, bEpNum, wRegValue) \ (*(__IO uint16_t *)(&(USBx)->EP0R + ((bEpNum) * 2U)) = (uint16_t)(wRegValue)) /* GetENDPOINT */ #define PCD_GET_ENDPOINT(USBx, bEpNum) (*(__IO uint16_t *)(&(USBx)->EP0R + ((bEpNum) * 2U))) /** * @brief sets the type in the endpoint register(bits EP_TYPE[1:0]) * @param USBx USB peripheral instance register address. * @param bEpNum Endpoint Number. * @param wType Endpoint Type. * @retval None */ #define PCD_SET_EPTYPE(USBx, bEpNum, wType) \ (PCD_SET_ENDPOINT((USBx), (bEpNum), \ ((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_MASK) | (wType) | USB_EP_CTR_TX | USB_EP_CTR_RX))) /** * @brief gets the type in the endpoint register(bits EP_TYPE[1:0]) * @param USBx USB peripheral instance register address. * @param bEpNum Endpoint Number. * @retval Endpoint Type */ #define PCD_GET_EPTYPE(USBx, bEpNum) (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_FIELD) /** * @brief free buffer used from the application realizing it to the line * toggles bit SW_BUF in the double buffered endpoint register * @param USBx USB device. * @param bEpNum, bDir * @retval None */ #define PCD_FREE_USER_BUFFER(USBx, bEpNum, bDir) \ do { \ if ((bDir) == 0U) \ { \ /* OUT double buffered endpoint */ \ PCD_TX_DTOG((USBx), (bEpNum)); \ } \ else if ((bDir) == 1U) \ { \ /* IN double buffered endpoint */ \ PCD_RX_DTOG((USBx), (bEpNum)); \ } \ } while(0) /** * @brief sets the status for tx transfer (bits STAT_TX[1:0]). * @param USBx USB peripheral instance register address. * @param bEpNum Endpoint Number. * @param wState new state * @retval None */ #define PCD_SET_EP_TX_STATUS(USBx, bEpNum, wState) \ do { \ uint16_t _wRegVal; \ \ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_DTOGMASK; \ /* toggle first bit ? */ \ if ((USB_EPTX_DTOG1 & (wState))!= 0U) \ { \ _wRegVal ^= USB_EPTX_DTOG1; \ } \ /* toggle second bit ? */ \ if ((USB_EPTX_DTOG2 & (wState))!= 0U) \ { \ _wRegVal ^= USB_EPTX_DTOG2; \ } \ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \ } while(0) /* PCD_SET_EP_TX_STATUS */ /** * @brief sets the status for rx transfer (bits STAT_TX[1:0]) * @param USBx USB peripheral instance register address. * @param bEpNum Endpoint Number. * @param wState new state * @retval None */ #define PCD_SET_EP_RX_STATUS(USBx, bEpNum,wState) \ do { \ uint16_t _wRegVal; \ \ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_DTOGMASK; \ /* toggle first bit ? */ \ if ((USB_EPRX_DTOG1 & (wState))!= 0U) \ { \ _wRegVal ^= USB_EPRX_DTOG1; \ } \ /* toggle second bit ? */ \ if ((USB_EPRX_DTOG2 & (wState))!= 0U) \ { \ _wRegVal ^= USB_EPRX_DTOG2; \ } \ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \ } while(0) /* PCD_SET_EP_RX_STATUS */ /** * @brief sets the status for rx & tx (bits STAT_TX[1:0] & STAT_RX[1:0]) * @param USBx USB peripheral instance register address. * @param bEpNum Endpoint Number. * @param wStaterx new state. * @param wStatetx new state. * @retval None */ #define PCD_SET_EP_TXRX_STATUS(USBx, bEpNum, wStaterx, wStatetx) \ do { \ uint16_t _wRegVal; \ \ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (USB_EPRX_DTOGMASK | USB_EPTX_STAT); \ /* toggle first bit ? */ \ if ((USB_EPRX_DTOG1 & (wStaterx))!= 0U) \ { \ _wRegVal ^= USB_EPRX_DTOG1; \ } \ /* toggle second bit ? */ \ if ((USB_EPRX_DTOG2 & (wStaterx))!= 0U) \ { \ _wRegVal ^= USB_EPRX_DTOG2; \ } \ /* toggle first bit ? */ \ if ((USB_EPTX_DTOG1 & (wStatetx))!= 0U) \ { \ _wRegVal ^= USB_EPTX_DTOG1; \ } \ /* toggle second bit ? */ \ if ((USB_EPTX_DTOG2 & (wStatetx))!= 0U) \ { \ _wRegVal ^= USB_EPTX_DTOG2; \ } \ \ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \ } while(0) /* PCD_SET_EP_TXRX_STATUS */ /** * @brief gets the status for tx/rx transfer (bits STAT_TX[1:0] * /STAT_RX[1:0]) * @param USBx USB peripheral instance register address. * @param bEpNum Endpoint Number. * @retval status */ #define PCD_GET_EP_TX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_STAT) #define PCD_GET_EP_RX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_STAT) /** * @brief sets directly the VALID tx/rx-status into the endpoint register * @param USBx USB peripheral instance register address. * @param bEpNum Endpoint Number. * @retval None */ #define PCD_SET_EP_TX_VALID(USBx, bEpNum) (PCD_SET_EP_TX_STATUS((USBx), (bEpNum), USB_EP_TX_VALID)) #define PCD_SET_EP_RX_VALID(USBx, bEpNum) (PCD_SET_EP_RX_STATUS((USBx), (bEpNum), USB_EP_RX_VALID)) /** * @brief checks stall condition in an endpoint. * @param USBx USB peripheral instance register address. * @param bEpNum Endpoint Number. * @retval TRUE = endpoint in stall condition. */ #define PCD_GET_EP_TX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_TX_STATUS((USBx), (bEpNum)) == USB_EP_TX_STALL) #define PCD_GET_EP_RX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_RX_STATUS((USBx), (bEpNum)) == USB_EP_RX_STALL) /** * @brief set & clear EP_KIND bit. * @param USBx USB peripheral instance register address. * @param bEpNum Endpoint Number. * @retval None */ #define PCD_SET_EP_KIND(USBx, bEpNum) \ do { \ uint16_t _wRegVal; \ \ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK; \ \ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX | USB_EP_KIND)); \ } while(0) /* PCD_SET_EP_KIND */ #define PCD_CLEAR_EP_KIND(USBx, bEpNum) \ do { \ uint16_t _wRegVal; \ \ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPKIND_MASK; \ \ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \ } while(0) /* PCD_CLEAR_EP_KIND */ /** * @brief Sets/clears directly STATUS_OUT bit in the endpoint register. * @param USBx USB peripheral instance register address. * @param bEpNum Endpoint Number. * @retval None */ #define PCD_SET_OUT_STATUS(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum)) #define PCD_CLEAR_OUT_STATUS(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum)) /** * @brief Sets/clears directly EP_KIND bit in the endpoint register. * @param USBx USB peripheral instance register address. * @param bEpNum Endpoint Number. * @retval None */ #define PCD_SET_BULK_EP_DBUF(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum)) #define PCD_CLEAR_BULK_EP_DBUF(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum)) /** * @brief Clears bit CTR_RX / CTR_TX in the endpoint register. * @param USBx USB peripheral instance register address. * @param bEpNum Endpoint Number. * @retval None */ #define PCD_CLEAR_RX_EP_CTR(USBx, bEpNum) \ do { \ uint16_t _wRegVal; \ \ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (0x7FFFU & USB_EPREG_MASK); \ \ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_TX)); \ } while(0) /* PCD_CLEAR_RX_EP_CTR */ #define PCD_CLEAR_TX_EP_CTR(USBx, bEpNum) \ do { \ uint16_t _wRegVal; \ \ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (0xFF7FU & USB_EPREG_MASK); \ \ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX)); \ } while(0) /* PCD_CLEAR_TX_EP_CTR */ /** * @brief Toggles DTOG_RX / DTOG_TX bit in the endpoint register. * @param USBx USB peripheral instance register address. * @param bEpNum Endpoint Number. * @retval None */ #define PCD_RX_DTOG(USBx, bEpNum) \ do { \ uint16_t _wEPVal; \ \ _wEPVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK; \ \ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wEPVal | USB_EP_CTR_RX | USB_EP_CTR_TX | USB_EP_DTOG_RX)); \ } while(0) /* PCD_RX_DTOG */ #define PCD_TX_DTOG(USBx, bEpNum) \ do { \ uint16_t _wEPVal; \ \ _wEPVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK; \ \ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wEPVal | USB_EP_CTR_RX | USB_EP_CTR_TX | USB_EP_DTOG_TX)); \ } while(0) /* PCD_TX_DTOG */ /** * @brief Clears DTOG_RX / DTOG_TX bit in the endpoint register. * @param USBx USB peripheral instance register address. * @param bEpNum Endpoint Number. * @retval None */ #define PCD_CLEAR_RX_DTOG(USBx, bEpNum) \ do { \ uint16_t _wRegVal; \ \ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)); \ \ if ((_wRegVal & USB_EP_DTOG_RX) != 0U)\ { \ PCD_RX_DTOG((USBx), (bEpNum)); \ } \ } while(0) /* PCD_CLEAR_RX_DTOG */ #define PCD_CLEAR_TX_DTOG(USBx, bEpNum) \ do { \ uint16_t _wRegVal; \ \ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)); \ \ if ((_wRegVal & USB_EP_DTOG_TX) != 0U)\ { \ PCD_TX_DTOG((USBx), (bEpNum)); \ } \ } while(0) /* PCD_CLEAR_TX_DTOG */ /** * @brief Sets address in an endpoint register. * @param USBx USB peripheral instance register address. * @param bEpNum Endpoint Number. * @param bAddr Address. * @retval None */ #define PCD_SET_EP_ADDRESS(USBx, bEpNum, bAddr) \ do { \ uint16_t _wRegVal; \ \ _wRegVal = (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK) | (bAddr); \ \ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \ } while(0) /* PCD_SET_EP_ADDRESS */ /** * @brief Gets address in an endpoint register. * @param USBx USB peripheral instance register address. * @param bEpNum Endpoint Number. * @retval None */ #define PCD_GET_EP_ADDRESS(USBx, bEpNum) ((uint8_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPADDR_FIELD)) #define PCD_EP_TX_CNT(USBx, bEpNum) \ ((uint16_t *)((((uint32_t)(USBx)->BTABLE + \ ((uint32_t)(bEpNum) * 8U) + 2U) * PMA_ACCESS) + ((uint32_t)(USBx) + 0x400U))) #define PCD_EP_RX_CNT(USBx, bEpNum) \ ((uint16_t *)((((uint32_t)(USBx)->BTABLE + \ ((uint32_t)(bEpNum) * 8U) + 6U) * PMA_ACCESS) + ((uint32_t)(USBx) + 0x400U))) /** * @brief sets address of the tx/rx buffer. * @param USBx USB peripheral instance register address. * @param bEpNum Endpoint Number. * @param wAddr address to be set (must be word aligned). * @retval None */ #define PCD_SET_EP_TX_ADDRESS(USBx, bEpNum, wAddr) \ do { \ __IO uint16_t *_wRegVal; \ uint32_t _wRegBase = (uint32_t)USBx; \ \ _wRegBase += (uint32_t)(USBx)->BTABLE; \ _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + (((uint32_t)(bEpNum) * 8U) * PMA_ACCESS)); \ *_wRegVal = ((wAddr) >> 1) << 1; \ } while(0) /* PCD_SET_EP_TX_ADDRESS */ #define PCD_SET_EP_RX_ADDRESS(USBx, bEpNum, wAddr) \ do { \ __IO uint16_t *_wRegVal; \ uint32_t _wRegBase = (uint32_t)USBx; \ \ _wRegBase += (uint32_t)(USBx)->BTABLE; \ _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 4U) * PMA_ACCESS)); \ *_wRegVal = ((wAddr) >> 1) << 1; \ } while(0) /* PCD_SET_EP_RX_ADDRESS */ /** * @brief Gets address of the tx/rx buffer. * @param USBx USB peripheral instance register address. * @param bEpNum Endpoint Number. * @retval address of the buffer. */ #define PCD_GET_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_TX_ADDRESS((USBx), (bEpNum))) #define PCD_GET_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_RX_ADDRESS((USBx), (bEpNum))) /** * @brief Sets counter of rx buffer with no. of blocks. * @param pdwReg Register pointer * @param wCount Counter. * @param wNBlocks no. of Blocks. * @retval None */ #define PCD_CALC_BLK32(pdwReg, wCount, wNBlocks) \ do { \ (wNBlocks) = (wCount) >> 5; \ if (((wCount) & 0x1fU) == 0U) \ { \ (wNBlocks)--; \ } \ *(pdwReg) |= (uint16_t)(((wNBlocks) << 10) | USB_CNTRX_BLSIZE); \ } while(0) /* PCD_CALC_BLK32 */ #define PCD_CALC_BLK2(pdwReg, wCount, wNBlocks) \ do { \ (wNBlocks) = (wCount) >> 1; \ if (((wCount) & 0x1U) != 0U) \ { \ (wNBlocks)++; \ } \ *(pdwReg) |= (uint16_t)((wNBlocks) << 10); \ } while(0) /* PCD_CALC_BLK2 */ #define PCD_SET_EP_CNT_RX_REG(pdwReg, wCount) \ do { \ uint32_t wNBlocks; \ \ *(pdwReg) &= 0x3FFU; \ \ if ((wCount) > 62U) \ { \ PCD_CALC_BLK32((pdwReg), (wCount), wNBlocks); \ } \ else \ { \ if ((wCount) == 0U) \ { \ *(pdwReg) |= USB_CNTRX_BLSIZE; \ } \ else \ { \ PCD_CALC_BLK2((pdwReg), (wCount), wNBlocks); \ } \ } \ } while(0) /* PCD_SET_EP_CNT_RX_REG */ #define PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum, wCount) \ do { \ uint32_t _wRegBase = (uint32_t)(USBx); \ __IO uint16_t *pdwReg; \ \ _wRegBase += (uint32_t)(USBx)->BTABLE; \ pdwReg = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 2U) * PMA_ACCESS)); \ PCD_SET_EP_CNT_RX_REG(pdwReg, (wCount)); \ } while(0) /** * @brief sets counter for the tx/rx buffer. * @param USBx USB peripheral instance register address. * @param bEpNum Endpoint Number. * @param wCount Counter value. * @retval None */ #define PCD_SET_EP_TX_CNT(USBx, bEpNum, wCount) \ do { \ uint32_t _wRegBase = (uint32_t)(USBx); \ __IO uint16_t *_wRegVal; \ \ _wRegBase += (uint32_t)(USBx)->BTABLE; \ _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 2U) * PMA_ACCESS)); \ *_wRegVal = (uint16_t)(wCount); \ } while(0) #define PCD_SET_EP_RX_CNT(USBx, bEpNum, wCount) \ do { \ uint32_t _wRegBase = (uint32_t)(USBx); \ __IO uint16_t *_wRegVal; \ \ _wRegBase += (uint32_t)(USBx)->BTABLE; \ _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 6U) * PMA_ACCESS)); \ PCD_SET_EP_CNT_RX_REG(_wRegVal, (wCount)); \ } while(0) /** * @brief gets counter of the tx buffer. * @param USBx USB peripheral instance register address. * @param bEpNum Endpoint Number. * @retval Counter value */ #define PCD_GET_EP_TX_CNT(USBx, bEpNum) ((uint32_t)(*PCD_EP_TX_CNT((USBx), (bEpNum))) & 0x3ffU) #define PCD_GET_EP_RX_CNT(USBx, bEpNum) ((uint32_t)(*PCD_EP_RX_CNT((USBx), (bEpNum))) & 0x3ffU) /** * @brief Sets buffer 0/1 address in a double buffer endpoint. * @param USBx USB peripheral instance register address. * @param bEpNum Endpoint Number. * @param wBuf0Addr buffer 0 address. * @retval Counter value */ #define PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum, wBuf0Addr) \ do { \ PCD_SET_EP_TX_ADDRESS((USBx), (bEpNum), (wBuf0Addr)); \ } while(0) /* PCD_SET_EP_DBUF0_ADDR */ #define PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum, wBuf1Addr) \ do { \ PCD_SET_EP_RX_ADDRESS((USBx), (bEpNum), (wBuf1Addr)); \ } while(0) /* PCD_SET_EP_DBUF1_ADDR */ /** * @brief Sets addresses in a double buffer endpoint. * @param USBx USB peripheral instance register address. * @param bEpNum Endpoint Number. * @param wBuf0Addr: buffer 0 address. * @param wBuf1Addr = buffer 1 address. * @retval None */ #define PCD_SET_EP_DBUF_ADDR(USBx, bEpNum, wBuf0Addr, wBuf1Addr) \ do { \ PCD_SET_EP_DBUF0_ADDR((USBx), (bEpNum), (wBuf0Addr)); \ PCD_SET_EP_DBUF1_ADDR((USBx), (bEpNum), (wBuf1Addr)); \ } while(0) /* PCD_SET_EP_DBUF_ADDR */ /** * @brief Gets buffer 0/1 address of a double buffer endpoint. * @param USBx USB peripheral instance register address. * @param bEpNum Endpoint Number. * @retval None */ #define PCD_GET_EP_DBUF0_ADDR(USBx, bEpNum) (PCD_GET_EP_TX_ADDRESS((USBx), (bEpNum))) #define PCD_GET_EP_DBUF1_ADDR(USBx, bEpNum) (PCD_GET_EP_RX_ADDRESS((USBx), (bEpNum))) /** * @brief Gets buffer 0/1 address of a double buffer endpoint. * @param USBx USB peripheral instance register address. * @param bEpNum Endpoint Number. * @param bDir endpoint dir EP_DBUF_OUT = OUT * EP_DBUF_IN = IN * @param wCount: Counter value * @retval None */ #define PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount) \ do { \ if ((bDir) == 0U) \ /* OUT endpoint */ \ { \ PCD_SET_EP_RX_DBUF0_CNT((USBx), (bEpNum), (wCount)); \ } \ else \ { \ if ((bDir) == 1U) \ { \ /* IN endpoint */ \ PCD_SET_EP_TX_CNT((USBx), (bEpNum), (wCount)); \ } \ } \ } while(0) /* SetEPDblBuf0Count*/ #define PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount) \ do { \ uint32_t _wBase = (uint32_t)(USBx); \ __IO uint16_t *_wEPRegVal; \ \ if ((bDir) == 0U) \ { \ /* OUT endpoint */ \ PCD_SET_EP_RX_CNT((USBx), (bEpNum), (wCount)); \ } \ else \ { \ if ((bDir) == 1U) \ { \ /* IN endpoint */ \ _wBase += (uint32_t)(USBx)->BTABLE; \ _wEPRegVal = (__IO uint16_t *)(_wBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 6U) * PMA_ACCESS)); \ *_wEPRegVal = (uint16_t)(wCount); \ } \ } \ } while(0) /* SetEPDblBuf1Count */ #define PCD_SET_EP_DBUF_CNT(USBx, bEpNum, bDir, wCount) \ do { \ PCD_SET_EP_DBUF0_CNT((USBx), (bEpNum), (bDir), (wCount)); \ PCD_SET_EP_DBUF1_CNT((USBx), (bEpNum), (bDir), (wCount)); \ } while(0) /* PCD_SET_EP_DBUF_CNT */ /** * @brief Gets buffer 0/1 rx/tx counter for double buffering. * @param USBx USB peripheral instance register address. * @param bEpNum Endpoint Number. * @retval None */ #define PCD_GET_EP_DBUF0_CNT(USBx, bEpNum) (PCD_GET_EP_TX_CNT((USBx), (bEpNum))) #define PCD_GET_EP_DBUF1_CNT(USBx, bEpNum) (PCD_GET_EP_RX_CNT((USBx), (bEpNum))) /** * @} */ /** * @} */ /** * @} */ #endif /* defined (USB) */ #ifdef __cplusplus } #endif #endif /* STM32F3xx_HAL_PCD_H */