tinyusb-cdc-stm32f302c8-stm32-hal-minimal/Src/usb_descriptors.c

/*
 * The MIT License (MIT)
 *
 * Copyright (c) 2019 Ha Thach (tinyusb.org)
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 *
 */

#include "tusb.h"
#include "usb_descriptors.h"

/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
 * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
 *
 * Auto ProductID layout's Bitmap:
 *   [MSB]         HID | MSC | CDC          [LSB]
 */
#define _PID_MAP(itf, n) ((CFG_TUD_##itf) << (n))
#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
                 _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4))

#define USB_VID 0xCaff
#define USB_BCD 0x0200

//--------------------------------------------------------------------+
// Device Descriptors
//--------------------------------------------------------------------+
tusb_desc_device_t const desc_device = {
    .bLength = sizeof(tusb_desc_device_t),
    .bDescriptorType = TUSB_DESC_DEVICE,
    .bcdUSB = USB_BCD,

    // Use Interface Association Descriptor (IAD) for CDC
    // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1)
    .bDeviceClass = TUSB_CLASS_CDC,
    .bDeviceSubClass = CDC_COMM_SUBCLASS_ABSTRACT_CONTROL_MODEL,
    .bDeviceProtocol = CDC_COMM_PROTOCOL_NONE,

    .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE,

    .idVendor = USB_VID,
    .idProduct = USB_PID,
    .bcdDevice = 0x0100,

    .iManufacturer = 0x01,
    .iProduct = 0x02,
    .iSerialNumber = 0x03,

    .bNumConfigurations = 0x01};

// Invoked when received GET DEVICE DESCRIPTOR
// Application return pointer to descriptor
uint8_t const *tud_descriptor_device_cb(void)
{
    return (uint8_t const *)&desc_device;
}

//--------------------------------------------------------------------+
// Configuration Descriptor
//--------------------------------------------------------------------+

// THIS MUST HAVE ONLY THE MINIMUM AMOUNT OF CLASSES BEING USED
// I HAD THE STORAGE CLASS IN THIS LIST ACCIDENTALLY FROM THE EXAMPLE
// AND THE CDC DID NOT WORK SINCE THE STORAGE CLASS WAS NOT CONFIGURED!
enum
{
    ITF_NUM_CDC = 0,
    ITF_NUM_CDC_DATA,
    ITF_NUM_TOTAL
};

#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
// LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
// 0 control, 1 In, 2 Bulk, 3 Iso, 4 In, 5 Bulk etc ...
#define EPNUM_CDC_NOTIF 0x81
#define EPNUM_CDC_OUT 0x02
#define EPNUM_CDC_IN 0x82

#define EPNUM_MSC_OUT 0x05
#define EPNUM_MSC_IN 0x85

#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU == OPT_MCU_SAMX7X
// SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT
//    e.g EP1 OUT & EP1 IN cannot exist together
#define EPNUM_CDC_NOTIF 0x81
#define EPNUM_CDC_OUT 0x02
#define EPNUM_CDC_IN 0x83

#define EPNUM_MSC_OUT 0x04
#define EPNUM_MSC_IN 0x85

#elif CFG_TUSB_MCU == OPT_MCU_CXD56
// CXD56 doesn't support a same endpoint number with different direction IN and OUT
//    e.g EP1 OUT & EP1 IN cannot exist together
// CXD56 USB driver has fixed endpoint type (bulk/interrupt/iso) and direction (IN/OUT) by its number
// 0 control (IN/OUT), 1 Bulk (IN), 2 Bulk (OUT), 3 In (IN), 4 Bulk (IN), 5 Bulk (OUT), 6 In (IN)
#define EPNUM_CDC_NOTIF 0x83
#define EPNUM_CDC_OUT 0x02
#define EPNUM_CDC_IN 0x81

#define EPNUM_MSC_OUT 0x05
#define EPNUM_MSC_IN 0x84

#elif CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X
// FT9XX doesn't support a same endpoint number with different direction IN and OUT
//    e.g EP1 OUT & EP1 IN cannot exist together
#define EPNUM_CDC_NOTIF 0x81
#define EPNUM_CDC_OUT 0x02
#define EPNUM_CDC_IN 0x83

#define EPNUM_MSC_OUT 0x04
#define EPNUM_MSC_IN 0x85

#else
#define EPNUM_CDC_NOTIF 0x81
#define EPNUM_CDC_OUT 0x02
#define EPNUM_CDC_IN 0x82

#endif

#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN)

// full speed configuration
uint8_t const desc_fs_configuration[] = {
    // Config number, interface count, string index, total length, attribute, power in mA
    TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 500),

    // Interface number, string index, EP notification address and size, EP data address (out, in) and size.
    TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64),

    // Interface number, string index, EP Out & EP In address, EP size
    // TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 64),
};

#if TUD_OPT_HIGH_SPEED
// Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration

// high speed configuration
uint8_t const desc_hs_configuration[] = {
    // Config number, interface count, string index, total length, attribute, power in mA
    TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),

    // Interface number, string index, EP notification address and size, EP data address (out, in) and size.
    TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 512),

    // Interface number, string index, EP Out & EP In address, EP size
    // TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 512),
};

// other speed configuration
uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN];

// device qualifier is mostly similar to device descriptor since we don't change configuration based on speed
tusb_desc_device_qualifier_t const desc_device_qualifier = {
    .bLength = sizeof(tusb_desc_device_qualifier_t),
    .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER,
    .bcdUSB = USB_BCD,

    .bDeviceClass = TUSB_CLASS_MISC,
    .bDeviceSubClass = MISC_SUBCLASS_COMMON,
    .bDeviceProtocol = MISC_PROTOCOL_IAD,

    .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE,
    .bNumConfigurations = 0x01,
    .bReserved = 0x00};

// Invoked when received GET DEVICE QUALIFIER DESCRIPTOR request
// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete.
// device_qualifier descriptor describes information about a high-speed capable device that would
// change if the device were operating at the other speed. If not highspeed capable stall this request.
uint8_t const *tud_descriptor_device_qualifier_cb(void)
{
    return (uint8_t const *)&desc_device_qualifier;
}

// Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request
// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
// Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa
uint8_t const *tud_descriptor_other_speed_configuration_cb(uint8_t index)
{
    (void)index; // for multiple configurations

    // if link speed is high return fullspeed config, and vice versa
    // Note: the descriptor type is OHER_SPEED_CONFIG instead of CONFIG
    memcpy(desc_other_speed_config,
           (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_fs_configuration : desc_hs_configuration,
           CONFIG_TOTAL_LEN);

    desc_other_speed_config[1] = TUSB_DESC_OTHER_SPEED_CONFIG;

    return desc_other_speed_config;
}

#endif // highspeed

// Invoked when received GET CONFIGURATION DESCRIPTOR
// Application return pointer to descriptor
// Descriptor contents must exist long enough for transfer to complete
uint8_t const *tud_descriptor_configuration_cb(uint8_t index)
{
    (void)index; // for multiple configurations

#if TUD_OPT_HIGH_SPEED
    // Although we are highspeed, host may be fullspeed.
    return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_hs_configuration : desc_fs_configuration;
#else
    return desc_fs_configuration;
#endif
}

//--------------------------------------------------------------------+
// String Descriptors
//--------------------------------------------------------------------+

// String Descriptor Index
enum
{
    STRID_LANGID = 0,
    STRID_MANUFACTURER,
    STRID_PRODUCT,
    STRID_SERIAL,
};

// array of pointer to string descriptors
char const *string_desc_arr[] = {
    (const char[]){0x09, 0x04}, // 0: is supported language is English (0x0409)
    "Peterus",                  // 1: Manufacturer
    "Neptunium",                // 2: Product
    NULL,                       // 3: Serials will use unique ID if possible
    "Neptunium CDC",            // 4: CDC Interface
};

#define DESC_STR_SIZE 32 // bytes

static uint16_t _desc_str[DESC_STR_SIZE + 1];

static size_t board_usb_get_serial(uint16_t desc_str1[], size_t max_chars)
{
    uint8_t uid[16] __attribute__((aligned(4)));
    size_t uid_len;

    uint32_t *uid32 = (uint32_t *)(uintptr_t)uid;
    uid32[0] = HAL_GetUIDw0();
    uid32[1] = HAL_GetUIDw1();
    uid32[2] = HAL_GetUIDw2();
    uid_len = 12;

    if (uid_len > max_chars / 2)
        uid_len = max_chars / 2;

    for (size_t i = 0; i < uid_len; i++)
    {
        for (size_t j = 0; j < 2; j++)
        {
            const char nibble_to_hex[16] = {
                '0', '1', '2', '3', '4', '5', '6', '7',
                '8', '9', 'A', 'B', 'C', 'D', 'E', 'F'};
            uint8_t const nibble = (uid[i] >> (j * 4)) & 0xf;
            desc_str1[i * 2 + (1 - j)] = nibble_to_hex[nibble]; // UTF-16-LE
        }
    }

    return 2 * uid_len;
}

// Invoked when received GET STRING DESCRIPTOR request
// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid)
{
    (void)langid;
    size_t chr_count;

    switch (index)
    {
    case STRID_LANGID:
        memcpy(&_desc_str[1], string_desc_arr[0], 2);
        chr_count = 1;
        break;

    case STRID_SERIAL:
        chr_count = board_usb_get_serial(_desc_str + 1, DESC_STR_SIZE);
        break;

    default:
        // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
        // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors

        if (!(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])))
            return NULL;

        const char *str = string_desc_arr[index];

        // Cap at max char
        chr_count = strlen(str);
        size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type
        if (chr_count > max_count)
            chr_count = max_count;

        // Convert ASCII string into UTF-16
        for (size_t i = 0; i < chr_count; i++)
        {
            _desc_str[1 + i] = str[i];
        }
        break;
    }

    // first byte is length (including header), second byte is string type
    _desc_str[0] = (uint16_t)((TUSB_DESC_STRING << 8) | (2 * chr_count + 2));

    return _desc_str;
}