peter/neptunium-firmware
1
0
Fork 0
mirror of https://github.com/peter-tanner/neptunium-firmware.git synced 2024-11-30 12:00:19 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity
master
neptunium-firmware/Drivers/sx126x_driver/CHANGELOG.md
Peter aa3b50eed2 Initial commit. Logging using tinyusb on stm32f302c8t6. WORKING: 
WORKING: lps22hb, lsm6dsox, neo-m9n
TODO: sx1262, SD card, freertos
2024-07-06 04:25:33 +08:00

2.2 KiB
Raw Permalink Blame History

Changelog

All notable changes to this project will be documented in this file.

The format is based on Keep a Changelog, and this project adheres to Semantic Versioning.

[2.3.2] - 2023-12-15

Changed

  • sx126x_set_gfsk_sync_word() function - Remove memcpy usage

[2.3.1] - 2023-11-8

Fixed

  • lr_fhss_payload_whitening() function - Cast missing on lfsr parameter

[2.3.0] - 2023-10-10

Added

  • sx126x_set_bpsk_mod_params() function - Set the modulation parameters for BPSK packets
  • sx126x_set_bpsk_pkt_params() function - Set the packet parameters for BPSK packets

[2.2.0] - 2023-03-27

Added

  • sx126x_driver_version_get_version_string() function - produces a c-string representation of the driver version
  • SX126X_DRIVER_VERSION_CHECK macro - validates the provided version information is compatible with the driver
  • sx126x_lr_fhss_get_bit_delay_in_us( ) function - computes the delay between the last LR-FHSS bit sent and the TX done interrupt

[2.1.0] - 2022-05-18

Added

  • sx126x_set_gfsk_pkt_address() function - configure both GFSK node and brodcast filtering addresses
  • sx126x_handle_rx_done() function - perform all requested actions when the chip leaves the Rx mode

[2.0.1] - 2021-11-23

Added

  • Support of LR-FHSS (see sx126x_lr_fhss.c and sx126x_lr_fhss.h)
  • sx126x_get_lora_params_from_header() function - extracts the LoRa coding rate and CRC configuration from the packet header
  • sx126x_add_registers_to_retention_list() function - allows to add up to 4 registers to the retention list
  • sx126x_init_retention_list() - add registers used by workarounds in the driver to the retention list
  • sx126x_cal_img_in_mhz() - takes frequency interval bounds in MHz for calibration

Changed

  • Revised BSD License changed to the Clear BSD License
  • sx126x_set_lora_symb_nb_timeout now rounds up to nearest possible number of symbol
  • SX126X_REG_IRQ_POLARITY is renamed SX126X_REG_IQ_POLARITY
  • sx126x_cal_img() function - takes frequency interval bounds in raw steps

[1.0.0] - 2020-09-24

General

  • Initial version